Standard R10-2 GNSS receiver features

The R10-2 GNSS receiver has the following features:

• Measure points in challenging GNSS environments with greater accuracy, reliability, and productivity than ever before with Trimble ProPoint™ GNSS technology
• Small, lightweight design – 1.12 kg (2.49 lb) (integrated radio, GNSS receiver, GNSS antenna and battery); 3.57 kg (7.86 lb) complete system weight (rover including TSC3 controller and rod)
• 672-channel, Trimble 360 receiver, fully future-proof signal tracking of current GNSS systems:
  • GPS: L1C/A, L2C, L2E, L5
  • GLONASS: L1C/A, L1P, L2C/A, L2P, L3
  • SBAS: L1C/A, L5
  • Galileo: E1, E5A, E5B, E5 AltBOC, E61 The current capability in the receivers is based on publicly available information. As such, Trimble cannot guarantee that these receivers will be fully compatible with a future generation of Galileo satellites or signals.
  • BeiDou: B1, B1A, B2, B2C, B2B, B3
  • QZSS: L1C/A, L1S, L1C, L2C, L5, L6
  • NavIC: L5
• Increased productivity and measurement traceability with SurePoint™ tilt compensation technology
• Capable of using Trimble CenterPoint^® RTX corrections delivered via satellite or IP
• Reduced downtime due to loss of radio or cellular signal with Trimble xFill^® technology
• Capable of tracking all OmniSTAR^® signals
• Performs all site measurement and stakeout operations within the operating range of the radio
• Internal, removable, smart Lithium-ion battery provides up to 6+ hours GNSS rover operation per battery
• Bluetooth wireless technology for cable free, no hassle, base or rover operation
• Integrated Wi-Fi
• Simple keypad with on/off key and LED indicators for power, radio, Wi-Fi, and satellite tracking
• 20 Hz update rate
• Full base/rover interoperability
• Operates within a Trimble VRS Now™ network for conventional base station-free rover capability
• Fully integrated 3.5G UMTS cellular modem2 Due to local regulations, the integrated cellular modem cannot be enabled in China, Taiwan, or Brazil. A Trimble controller integrated cellular modem or external cellular modem can be used to obtain GNSS corrections via an IP (Internet Protocol) connection.
• Integrated receive and transmit radio (optional)
• Capable of tracking all SBAS systems (WAAS/EGNOS/MSAS/GAGAN)