Using the battery charger
The charger can charge three types of Lithium-ion batteries. It can be powered by AC power or vehicle battery.
The dual-slot charger consists of:
-
Charger dual-battery slot (P/N 109000)
-
Power supply for charger (P/N 107000)
-
Power cord (6 ft). Different cords with appropriate plugs for different countries are supplied with the power supply.
-
Charger battery slot insert (P/N 109001-00)
Chargeable batteries
The charge can charge the following types of batteries:
-
P/N 76767 Lithium-ion Rechargeable Battery (Smart Battery). Requires a plastic adapter insert to fit into the charger
-
P/N 99511-30 Lithium-ion Rechargeable Battery (Smart Battery). Remove battery slot inserts to charge this type of battery.
-
P/N 92670 Lithium-ion Rechargeable Battery. Remove battery slot inserts to charge this type of battery.
Charger slots
The charger has two slots. Each slot can charge one of the three supported battery types. Batteries are charged concurrently for P/N 92670 and P/N 76767 battery types and sequentially for the P/N 99511-30 battery type. Beside each slot are three LED indicators (red, yellow, and green) to indicate the battery and charging / conditioning status
Power supply
The charger can be powered by AC power (using the power supply for the charger) or by car voltage using a 12V vehicle adapter for dual battery charger (P/N P/N 108090, not included with receiver kit).
AC power supply is an external adapter, usable worldwide. Different cords with appropriate plugs for different countries are supplied with adapter.
Vehicle power
The charger can be powered by vehicle voltage of nominal 12 V. It can withstand voltages of a vehicle voltage of nominal 24 V (maximum 32 V). So if the user connects the vehicle cable by mistake to a 24 V socket in a vehicle the charger does not start charging but latches in fault condition and flashes all green LEDs. The power must be removed to reset the fault condition.
Charger technical data
DC Power Input Voltage limits |
10 V to 32 V |
Absolute maximum input voltage |
32 V |
Over voltage |
21 V to 32 V |
Working voltage |
10 V to 21 V |
Under voltage |
<10 V |
Charging (19 V in, 25 °C, 10% to 90% charge) |
|
|
<3 Hr |
|
<3 Hr |
|
<4 Hr |
Charging (12 V in, 25 °C, 10% to 90% charge) |
|
|
<3 Hr |
|
<3 Hr |
|
<6 Hr |