R10 GNSS receiver features

The R10 GNSS receiver has the following features:

• Small, lightweight design – 1.12 kg (2.49 lb) (integrated radio, GNSS receiver, GNSS antenna and battery); 3.57 kg (7.86 lb) complete system weight (rover including TSC3 controller and rod)
• The quick setup, high mobility base or rover receiver, is ideal for any size jobsite as a rover and for working on multiple jobsites on a daily or weekly basis
• 440-channel, Trimble 360 receiver, fully future-proof signal tracking of current GNSS systems:
  • GPS: L1C/A, L1C, L2C, L2E, L5
  • GLONASS: L1C/A, L1P, L2C/A, L2P, L3
  • SBAS: L1C/A, L5
  • Galileo: E1, E5A, E5B
  • BeiDou: B1, B2
• Measure points sooner, faster and in harsh environments with HD-GNSS
• Increased productivity and measurement traceability with SurePoint™ auto-tilt compensation technology
• Capable of using Trimble CenterPoint^® RTX corrections delivered via satellite or IP
• Reduced downtime due to loss of radio signal with Trimble xFill^® technology
• Capable of tracking all OmniSTAR^® signals
• Performs all site measurement and stakeout operations within the operating range of the radio
• Internal, removable, smart Lithium-ion battery provides up to 5+ hours GNSS rover operation per battery
• Bluetooth wireless technology for cable free, no hassle, base or rover operation
• Simple keypad with on/off key and LED indicators for power, radio, Wi-Fi, and satellite tracking
• 20 Hz update rate
• Full base/rover interoperability
• Operates within a Trimble VRS™ network for conventional base station-free rover capability
• Fully integrated 3.5G UMTS cellular modem
• Integrated receive and transmit radio
• Capable of tracking all SBAS systems (WAAS/EGNOS/MSAS/GAGAN)