RINEX Metadata

These settings are only relevant if you are converting data files to a RINEX format from the Data Files directory or as part of the FTP or Email Push. Use this page to add the following header information to all data files converted to the RINEX format.

NOTES – From version 6.40:

(R10-2 only) Added QZSS L6 support for the receiver on-board RINEX converter.

QZSS CLAS is supported. QZSS CLAS provides centimeter-level nationwide positioning PPP-RTK correction service for Japan. Compact SSR correction format broadcast at 2,000 bps on the QZSS L6D signal. QZSS CLAS supports multi-GNSS including GPS, Galileo, and QZSS. Use firmware version 6.26 or later and enable QZSS L6D on the Tracking screen.

QZSS CLAS	Static (95%)	Kinematic (95%)
Horizontal accuracy	≤ 6 cm	≤ 12 cm
Vertical accuracy	≤ 12 cm	≤ 24 cm

Select Data Logging / RINEX Metadata.

Observer Name – Enter the Observers name (maximum of 20 characters).

Agency Name – Enter the Agency name (maximum of 40 characters).

Station Name – Enter the four-character IGS station name.

Marker Number – Select the monument or marker number (0 – 9).

Receiver Number – Select the receiver number (0 – 9).

ISO Country Code – Select the ISO country code.