SSID Identification

An SSID is a 32-character alphanumeric key that uniquely identifies a wireless LAN. It enables wireless equipment such as a computer to access the Wi-Fi enabled receiver.

By default, the receiver uses the following identification:

• "Trimble GNSS NNNN" (NNNN = the last four digits of the serial number) - Rover or Rover/Base configured

• "Trimble Base NNNN" - Base ONLY capable

By default, the password for the SSID is: abcdeabcde.

Changing the SSID

You can change the SSID of a receiver in the following ways:

• By changing it in the web interface.

• By changing it in the programming interface.

• By forcing the receiver to its factory default setting.

• By using your field software.

• AutoBase success.

AutoBase mode	SSID format
AutoBase off	If the receiver cannot find an AutoBase file, there is no change in the SSID format.
AutoBase Enable with warning and can find reference file	Trimble Base StationName { Real reference base } Or Trimble Base NNNN { Auto00XX reference base }
AutoBase Enable with warning and cannot find reference file	If the receiver cannot find a reference file (current Application file), there is no change in the SSID format.
AutoBase Enable without warning and can find reference file	Trimble Base StationName { Real reference base } Or Trimble Base NNNN { Auto00XX reference base }
AutoBase Enable without warning and cannot find reference file, HERE position is used, and “Auto000X” will be created	Trimble Base NNNN
AutoBase Enable – HERE position always “Auto000X” will be generated every time	Trimble Base NNNN