Step 4. Activate warranties, install options and radio settings, and update the receiver firmware

  1. Install Trimble Installation Manager on your computer or Trimble data collector. Go to install.trimble.com.

  2. Connect the receiver to your computer using a USB (e.g. P/N 80751) or serial cable (e.g. P/N 59044, 59046).

  3. Start Trimble Installation Manager.

  4. Select the Receiver tab and click Connect.

  5. Select COMx Trimble USB from the list of available ports and click OK.

For information on updating the receiver firmware, see Updating a receiver.