Sentinel technology
The instruments can be equipped with Sentinel technology as an option.
NOTE – The Sentinel system was previously known as Locate2Protect (L2P) which included a previous generation of hardware modules installed in the instrument.
With the Sentinel module activated it is possible to track the location of the instrument in real time with the Sentinel mobile application
Apart from knowing where the instrument is located, it is also possible to receive alerts if the instrument leaves a user definable geo fence area and/or if the instrument is subjected to shock or abuse.
The Sentinel module determines the location of the instrument with a GPS receiver. If the instrument is placed so that the GPS receiver cannot receive signals from the satellites, e.g. indoors, the Sentinel module determines the location of the instrument with Assisted GPS (A-GPS). A-GPS creates a triangle connection to the nearest cellular towers to determine the location of the instrument.
Airplane mode
WARNING – Since the Sentinel or L2P module communicates via cellular technology it is necessary to check local regulations before transporting this instrument by air. Make sure that the Sentinel or L2P module is inactivated during air transport.
To inactivate the Sentinel or L2P module
With a valid subscription for the Sentinel or L2P module which has been activated through your local service provider, it is possible to activate “Airplane mode” on the Sentinel or L2P module from the Sentinel mobile application.
Without a valid subscription for the L2P module it is not possible to activate “Airplane mode” on the Sentinel or L2P module from the Sentinel mobile application. In this case you will need to make sure that the internal battery and/or other external power sources are removed from the instrument during transport. If not removed, the Sentinel or L2P module will be powered on and is able to search for network status and therefore run the risk of violating regulations.
