Starting the instrument

NOTE – Before following any of the instructions below, put the instrument in the face 2 position, i.e. the telescope eyepiece and face 2 keyboard and display are pointing towards you.

The face 2 display menus described in this section can only be accessed when there is no T70 attached; remove the T70 before starting the instrument.

  1. Start the instrument by pressing the On/Off key.

    Once you start the instrument, the Select Mode menu appears in the face 2 display.

  2. To go to Setup/Level press .

NOTE – If no selection is made within 10 seconds the instrument will go to suspend mode. To return to the select mode menu press the trigger key.