eBubble and tilt warning for UTS measurements

When connected to a GNSS receiver with eBubble capabilities, the eBubble remains active in a side panel even when the UTS is selected as the primary positioning device. This will allow for the use of the receiver’s eBubble view on the screen to level the survey pole, regardless of which positioning device is selected as the primary device. To ensure the best results, it is recommended to perform an eBubble calibration with the receiver mounted on top of the prism when the pole is plumb.

If the Enable tilt warning for measurements checkbox is selected in the eBubble settings window, then if the survey pole is tilted beyond the specified settings, Siteworks will warn of excessive tilt when taking either a GNSS or a UTS measurement.