Status bar

The status bar icons at the top right of the screen contain relevant information about the current status of the positioning system, battery status, measure mode, and measurement type. The icons change depending on the positioning device. The following icons are typically available:

GNSS mode

Icon	Description
	The radio connection status to the base station. Clicking on this provides access to the Radio Information menu. This icon changes depending on how corrections are being received.
	The number of satellites being tracked and the horizontal and vertical precision of the GNSS position solution. Clicking on this opens the GNSS status menu. This icon also gives an indication of the alignment status for tilt-compensation enabled receivers.
	The battery level of the controller and externally connected GNSS receiver.
	Design Notification and Sync Status. Introduced in v1.75. This only appears when WorksManager notifications are enabled. It appears regardless of the type of positioning instrument connected: GNSS, total station, or integrated survey.

Total Station mode

Icon	Description
	Indicates the total station is in Target Tracking mode and provides access to the total station control panel. A lock button appears when the instrument is locked onto a prism.
	Indicates the total station is in Standard mode and provides access to the total station control panel. A lock button appears when the instrument is locked onto a prism.
	Shows the battery level of the controller and total station.

Integrated Survey mode

Icon	Description
	Button to change active positioning instrument. The button slider is on the side of the active instrument. Left is GNSS, right is Total Station.