Rear connectors (SPS modular)

For the SPS356 Modular GNSS receiver, see Rear connectors (SPS356).

Item

Connector Type

Description

1

TNC

Connect to the GNSS antenna

2

  • TNC (450 MHz Internal radio)

  • Reverse polarity TNC (900 MHz internal radio)

  • Not installed, system without internal radio

Connect to the radio antenna

3

Vent plug

External venting plug for pressure equalization

4

High Density DB26

  • Ethernet connectivity to a 10/100 Base-T network through an RJ45 jack on a multiport adapter (P/N 57167 or P/N 57168)

  • 'Slave' USB communications through the USB type B connector on the multiport adapter (P/N 57167)

  • 'Host' USB communications through the connector on the 26-pin cable (P/N 58339)

  • Primary power from an external power supply

  • External power input from an SPS700 total station battery cradle system

  • Full 9-wire RS-232 serial communications using the 26-9-pin multiport adapter (P/N 57168) or a 26-pin serial communications cable

  • 1PPS, 2 x RS-232 input DC, USB, Ethernet plug (P/N 60789-00 or P/N 77070-00)

  • 2 x RS-232, DC, Ethernet socket (P/N 65791 or P/N 78235-00)

5

Lemo (7-pin/0-shell)

  • 3 wire RS-232 serial communications using a 7-pin/ 0 shell Lemo cable

  • Secondary external power input

  • CAN