SPSx61 rear connectors

Item

Connector Type

Description

1
  • TNC (450 MHz Internal radio)
  • Reverse polarity TNC (900 MHz internal radio)
  • Not installed, system without internal radio

Connect to the radio antenna

2

TNC

Connect to GNSS antenna 1 for position. When connected to a GAx30 antenna, it will provide MSK Beacon signal.

OmniSTAR correction services are only available on this antenna port.

3

TNC

Connect to GNSS antenna 2 for vector and heading. When connected to a GAx30 antenna, it will provide MSK Beacon signal.

OmniSTAR is not supported on this antenna port.

4

High Density DB26
  • Ethernet with PoE connectivity to a 10/100 Base-T network through an RJ45 jack on a multiport adaptor (P/N 57167) or cable (P/N 65791-00).
  • Primary power from a Trimble AC/DC power supply (P/N 51695) using the multiport adaptor (P/N 57167) or cable (P/N 65791-00 or 78235-00).
  • Full 9-wire RS-232 serial communications using the 26-9-pin multiport adaptor (P/N 57168) or a 26-pin serial communications cable (P/N 65791-00)
  • 1PPS, 2 x RS-232, input DC, Ethernet cable (P/N 60789-00 or 77070-00)

5

Vent plug

External venting plug for pressure equalization