External power
Sources of external power include:
-
AC power
-
12 V vehicle battery
-
Trimble custom external battery pack
-
Generator power
-
Solar panel
Supported power cables
The SPSx61 receiver does not have an internal battery and must be powered by an external power source using one of the following cables:
|
Part |
SPS |
Power |
Power Source |
Other Connectors |
|---|---|---|---|---|
|
83223-02 |
Use with 78235-10 |
'Croc' clips |
Power from 12 V vehicle battery |
None |
|
57167 |
26-pin |
Adapter with DC plug |
Power from AC adapter |
USB (B) socket and ethernet socket |
|
57168 |
26-pin |
Adapter with DC plug |
Power from AC adapter |
Serial and ethernet socket |
|
60789-00, 77070-00 |
26-pin |
Cable with DC plug |
Power from AC adapter |
2 x Serial, ethernet plug, USB(A) plug, 1PPS (BNC) |
|
65791-00, 78235-00 |
26-pin |
Cable with DC plug |
Power from AC adapter |
2 x Serial, ethernet socket |
|
78235-10 |
26-pin |
Cable with SAE |
Power from SAE connection |
2 x Serial, ethernet socket, 1 PPS (BNC) |
Connecting the receiver to a vehicle battery
WARNING – Be careful when connecting the battery cable's clip leads to a vehicle battery. Do not allow any metal object or jewelry to connect (short) the battery's positive (+) terminal to either the negative (-) terminal or the metal of the vehicle connected to the battery. This could result in high current, arcing, and high temperatures, exposing the user to possible injury.
WARNING – When connecting an external battery, such as a vehicle battery, to the receiver, be sure to use the Trimble cable with proper over-current protection intended for this purpose, to avoid a safety hazard to the user or damage to the product.
