Cables for the marine modular receivers

Standard SPS adapter for 26-pin connector with serial interface. Provides DC power input, ethernet, and 9-pin serial I/O.

SPS adapter for 26-pin connector. Can be used to attach a USB memory stick. Provides DC power input, ethernet, and USB Host (type A).

Power/Data splitter cable for use with dual SPS modular receivers. Provides DC power input for both units via Lemo connectors. Serial data connection between the two units via Lemo connectors.

Available in 0.7 m, 2.4 m, and 7.6 m lengths.

For use with SPS modular receivers requiring power input on the 26-pin connector. Provides power via the SAE connector, modem via DB9(M), serial data via DB9(F), ethernet via RJ45 Socket, and 1PPS via BNC.

For use with SPS modular receivers requiring power input on the Lemo connector. Provides power via SAE connector and data via DB9 Serial.

Used to connect SPS devices and share power and ethernet. Use with P/N 86625-02 to connect an SPS modular receiver with an SNM941 Connected Site Gateway for internet Base station and Rebroadcaster applications. Provides power and ethernet only.

For use with an SNM941 Connected Site Gateway. Provides power input via SAE and adapts the SNM941 connector to an SPS Modular 26-pin allowing SPS cables and adapters to be used.

This Battery Clips-to-SAE cable is for use with a battery or DC power supply and can be used with the other SAE cables listed here.

Use this SAE-to-SAE extension cable when the battery or DC power supply is greater than 6.5 feet (2 meters) from unit. It also enables the power supply to be in a more secure area.

Use this cable to connect one DC power source with an SAE connector to two SAE connectors instead of using two separate DC cables from a DC source to two devices.

This cable connects between the office AC-to-DC power supply, which has a coaxial connector. The cable is ideal for use in the office to test receivers before field deployment. It is also useful for a site office or vessel when AC-to-DC power is available.