Default receiver settings (SPS modular receiver)
These settings are defined in the default application file.
|
Function |
Settings |
Factory default |
|---|---|---|
|
SV Enable |
- |
All SVs enabled |
|
General Controls |
Elevation mask |
10° |
|
PDOP mask |
99 |
|
|
RTK positioning mode |
Low Latency |
|
|
Motion |
Kinematic |
|
|
Lemo Port |
Baud rate |
38,400 |
|
Format |
8-None-1 |
|
|
Flow control |
None |
|
|
Modem Port |
Baud rate |
38,400 |
|
Format |
8-None-1 |
|
|
Flow control |
None |
|
|
Input Setup |
Station |
Any |
|
NMEA/ASCII (all supported messages) |
|
All ports Off |
|
Streamed Output |
|
All types Off |
|
Offset=00 |
||
|
RT17/Binary |
|
All ports Off |
|
Reference Position |
Latitude |
0° |
|
Longitude |
0° |
|
|
Altitude |
0.00 m HAE |
|
|
Antenna |
Type |
Zephyr 3 Base |
|
Height (true vertical) |
0.00 m |
|
|
Measurement method |
Bottom of antenna mount |
