GSOF message: L-Band Status Info

This message describes the L-band status information.

L-Band status information (Type 40 record)

Field	Item	Type	Value	Meaning
0	Output record type	Char		L-band status information record
1	Record length	Char		Bytes in record
2	Satellite name	Char	string	The name of the L-band satellite the receiver is trying to track. There are two tracking modes: In Auto mode, the receiver automatically picks a satellite to track and this field shows the name of the selected satellite. In Custom mode, the first 5 characters of "Custom" is reported i.e., "Custo".
3	Satellite frequency	Char	MHz	The frequency of the tracked satellite, in MHz
4	Satellite bit rate	Char	Hz	The bit rate of the tracked satellite, in Hz
5	SNR	Float	dB-Hz	The SNR (C/No dB-Hz) value of the tracked satellite
6	HP/XP subscribed engine	Char		The subscribed engine in the HP/XP library: 0: XP 1: HP 2: G2 3: HP + G2 4: HP + XP 0xFF: Unknown
7	HP/XP library mode	Char		0: Library is inactive 1: Library is active
8	VBS library mode	Char		0: Library is inactive 1: Library is active
9	Beam mode	Char		The mode of the L-band beam: 0: Off 1: FFT initializing 2: FFT running 3: Search initializing 4: Search running 5: Track initializing 6: Track searching 7: Tracking
10	OmniSTAR motion	Char		The motion state reported by the OmniSTAR library: 0: Dynamic 1: Static 2: OmniSTAR is not ready 0xFF: Unknown
11	3-sigma horizontal precision threshold	Char		Shows the configured 3-sigma horizontal precision threshold
12	3-sigma vertical precision threshold	Char		Shows the configured 3-sigma vertical precision threshold
13	NMEA encryption state	Char		0: Encryption is not applied to NMEA 1: Encryption is applied to NMEA
14	I/Q ratio	Char		Mean power in I and mean power in Q
15	Estimated bit error rate
16	Total unique words			Total unique words since the last search
17	Total unique words with one or more bit errors			Total unique words with one or more bit errors since the last search
18	Total bad unique word bits			Total bad unique word bits since the last search
19	Total # of viterbi symbols			Total number of viterbi symbols since the last search. When the count reaches FFFFFF00 the count resets to 0.
20	# of corrected viterbi symbols			Number of corrected viterbi symbols since the last search. This count is reset along with the number of viterbi symbols.
21	# of bad messages			Number of bad messages since the last search. A bad message has a non-0 flush byte.
22	MEAS frequency valid flag			0: The MEAS frequency could be out by a significant amount 1: The MEAS frequency is accurate
23	MEAS frequency			Measured satellite frequency in Hz