Configuring the receiver to log data for postprocessing
By default, the SPS receivers cannot log data unless you purchase the Data Logging option.
With the Data Logging option enabled, the receiver can collect GPS observations over a period of time. The observations can be used with GPS postprocessing software such as the Trimble Business Center to compute control networks and baselines.
- The Siteworks software supports the recording of raw GPS data in the SPS receivers when the Data Logging option is installed in the receiver. For information on how to initiate recording in the SPS receivers from Siteworks, refer to the Siteworks User Guide.
- Version 2.30 and later of the SCS900 software supports the recording of raw GPS data in the SPS receivers when the Data Logging option is installed in the receiver. For information on how to initiate recording in the SPS receivers from SCS900, refer to the SCS900 User Guide.
The
The receiver uses the internal memory of the receiver to store this data. You cannot process the data files until you transfer them to an office computer.
The receivers have a maximum of 32 MB memory.
The receiver has a maximum of 9.25 GB internal memory for data logging.