RT17/RT27 streamed data service

An RT17/RT27 service provides GPS observations, ephemerides, and other information, as defined for that service. When a “client” connects to the service, all data flow is from the receiver to the client.

The real-time Binary Output option (also known as RT17/RT27 messages or raw data) is available as an optional upgrade. By default, the Binary Output option is turned off. You must enable the option before RT17/RT27 messages can be streamed from the receiver. To enable the option, contact your local Trimble dealer.

Using the keypad and display to configure RT17/RT27 outputs

You can configure RT17/RT27 output during the base and rover setup using the keypad and display. See Outputting corrections.

Using the web interface to configure RT17/RT27 outputs

You can configure RT17/RT27 output using the I/O Configuration menu of the web interface of the receiver. Configure the stream to allow multiple client connections on a single port, or restrict the stream to a single client connection. To allow only authorized connections on the port, protect the output stream by requiring a password.