All operating controls are located on the front panel. Ports and connectors are located on the bottom of the unit.

Front panel

The front panel contains the Power button and four indicator LEDs.

• The Power button controls the receiver’s power on or off functions.
• The indicator LEDs show the status of power, satellite tracking, Wi-Fi, and radio reception.

Icon	Connections
	Power button
	Satellites
	Radio
	Battery status
	Wi-Fi

The LEDs on the front panel indicate various operating conditions. Generally, a lit or slowly flashing LED indicates normal operation, an LED that is flashing quickly indicates a condition that may require attention, and an unlit LED indicates that no operation is occurring. For more information, see Button and LED operations.

Lower housing

Each item is marked with a number to indicate its main function, as shown in the following table:

Icon	Name	Connections/Description
1	Label	The icon on the label shows if the antenna contains an internal radio or if it is a Wi-Fi only smart antenna
2	TNC radio antenna connection	Communications antenna
3	Label	Shows the serial number of the smart antenna
4	Battery door	Removable Lithium-ion battery
5	5/8" insert	Range pole or quick release adapter
6	Lemo port	USB and DC power in

Lemo port is a 7-pin 0-shell 2-key Lemo connector that supports USB communications and external power input. The Lemo port has no power outputs.

The TNC port connector is for connecting a radio antenna to the receiver internal radio. A whip “rubber duck” antenna is supplied with the system.