Power button operations
SPS modular receivers only.
Press the Power button 
to turn the receiver on and off.
In addition, you can tap to return to the Home screen, or hold down to perform the following operations:
|
To... |
Hold the Power button for... |
Notes |
|---|---|---|
|
turn off the receiver |
two seconds |
The display shows a countdown timer. When the display goes blank, release the Powerbutton. |
|
clear the almanac, ephemeris, and SV information |
15 seconds |
The display shows a countdown timer. When the display goes blank, continue to hold the Power button. The display shows a countdown time to clear the almanac and ephemeris. When the counter reaches 0, release the Power button. |
|
reset the receiver to its factory defaults and the default application file |
35 seconds |
The display shows a countdown timer. When the display goes blank, continue to hold the Power button. The display show a countdown to clear the almanac and ephemeris. When the counter reaches 0, continue to hold the Power button. The display indicates a countdown to resetting the receiver. When the counter reaches 0, release the Power button. |
|
force the receiver to power down |
at least 60 seconds |
If the reset method above does not work, use this method to force the receiver to turn off. When the Power LED goes off, release the Power button. |
