Installing a screen protector

The T7 tablet / Yuma 7 tablet computer is fitted with a chemically strengthened glass touchscreen, which is highly resistant to abrasion and impact damage. However to ensure maximum protection, it is recommended that you use a Trimble-approved toughened glass T7 tablet / Yuma 7 tablet computer screen protector.

To install a screen protector:

1. Place the device on a clean, flat surface. Make sure your hands are clean.

2. Clean the touchscreen with the supplied alcohol wipe.

3. Polish and dry the screen with the lint-free cleaning cloth supplied.

4. Remove any dust specs with the supplied dust sticker.

5. Remove the protective film from the screen protector.

6. Align the screen protector with the top of the glass display.

7. Carefully lay the screen protector down on the screen. If you make a mistake and the glass looks off-center, you can gently lift the screen protector up and realign it. Then, once the protector is on the screen, give it a soft press in the center and allow the adhesive surface to grip to the screen naturally.

   You can place the screen protector in place and fix it on the upper side with adhesive strips to the housing. This will keep the screen protector aligned when sticking it on.

8. If there are any bubbles remaining, use the cloth provided to gently smooth them toward the edges of the screen protector.

For more information on where to purchase the correct screen protector for your device, contact your local Trimble dealer.