Enable and Disable Baselines

Turn baselines off or on. Disabled baselines are not processed.

To disable baselines:

Select one or more baselines in the Project Explorer, right-click and select Disable.
Pick one or more baselines in a graphic view, right-click and select Disable.
Note: If a baseline has been processed and subsequently disabled, the resulting vector is cleared.

To enable baselines:

Select one or more baselines in the Project Explorer, right-click and select Enable.
Pick one or more baselines in a graphic view, right-click and select Enable.

To select and disable baselines by duration:

Deselect all objects by clicking a blank space in a graphic view.
Select Advanced Select in Home > Selection. The Advanced Select dialog displays.
In the Apply This Selection To group, specify whether to select from the currently selected objects or from all data, and whether to replace or add to the current selection.
Select Baselines in the Data type list.
Click Data with the following property and select Duration in the list.
Type the shortest duration that you want to use for processing baselines in the This value box.
Note: The duration must be in the time format used used by your computer's operating system, which is likely HH:MM:SS (Hours:Minutes:Seconds).
Click Apply to preview the results, or OK to make the selection and close the Advanced Select dialog.
Press [F11] to display the Properties pane. In the Status box, select Disabled.