Checklist

Consider the following points when installing and configuring the TDL510 radio:

1. All operating voltages of all the equipment concerned must always be switched OFF before connecting the serial interface cable.

2. For optimal results:

   1. The antenna should be installed in open space as far as possible from any possible sources of interference.

   2. The radio should not be installed onto a strongly vibrating surface.

   3. The radio should be installed in such a way as to minimize exposure to direct sunlight or excessive humidity.

3. To ensure reliable operation, the voltage output of the power supply must be stable enough and the current capability of the power supply must be sufficient.

4. The antenna must be installed according to instructions.

5. Serial interface settings between the radio and the terminal unit must correspond to each other.

6. All radios in the same system must be configured using same settings (radio frequency, channel spacing, and data field length).