Compliance notices

Type approval

Type approval, or acceptance, covers technical parameters of the equipment related to emissions that can cause interference. Type approval is granted to the manufacturer of the transmission equipment, independent from the operation or licensing of the units. Some countries have unique technical requirements for operation in particular radio-modem frequency bands. To comply with those requirements, Trimble may have modified your equipment to be granted type approval.

Unauthorized modification of the units voids the type approval, the warranty, and the operational license of the equipment.

Regulations and safety

Regulations regarding the use of the 403 MHz to 473 MHz radios vary greatly from country to country. In some countries, the unit can be used without obtaining an end-user license. Other countries require end-user licensing. For licensing information, consult your local Trimble dealer.

Before operating a Trimble radio, determine if authorization or a license to operate the unit is required in your country. It is the responsibility of the end user to obtain an operator's permit or license for the location or country of use.

Countries: USA and Canada only.

Canada

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.

  2. This device must accept any interference, including interference that may cause undesired operation of the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

  1. l’appareil ne doit pas produire de brouillage;

  2. l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be chosen so that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication.

Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé pour l’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l’intention des autres utilisateurs, il faut choisir le type d’antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (PIRE) ne dépasse pas l’intensité nécessaire à l’établissement d’une communication satisfaisante.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

This apparatus complies with Canadian RSS-GEN, RS‑102, RSS-247.

Cet appareil est conforme à la norme CNR-GEN, CNR‑102, CNR-247 du Canada.

USA

The Federal Communications Commission (FCC, USA) has dictated that on 1 January 2013, all radio users transmitting data between s/b 421 and 512 MHz within the United States of America, must operate within 12.5 kHz channels or transmit using the bits per second (bps) settings of 19200 bps when using a 25 kHz channel. For more information on the FCC mandate, please go to www.fcc.gov/narrowbanding-overview.

FCC compliance statement

Regulatory model number: TDL510

FCC Class B - Notice to Users. This device complies with part 15 of the FCC rules.

RESPONSIBLE PARTY:
Trimble Inc.
4450 Gibson Drive
Tipp City, Ohio 45371
USA
trimble.com/en/our-company/about/contact-information

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications made to this equipment not expressly approved by Trimble may void the FCC authorization to operate this equipment.

FCC Certified Modular Transceiver

The TR400900 (FCC ID: S9E123130) Singular-Modular Transceiver (410.0 to 470.0 MHz and 902.0 to 928.0 MHz selectable by the software) is approved for use with the following antenna:

  • A monopole type antenna with:

    • Connector: RP-TNC Male

    • Frequency range: 410 to 470 MHz and 902 to 928 MHz

    • Polarization: Vertical

    • Power: 1 W (both frequency ranges)

    • Maximum gain: 6 dBi (410 to 470 MHz), 6 dBi (902 to 928 MHz)

Trimble recommends you use Trimble P/N 123588 antenna - UHF, 6" Rubber Whip, 900 MHz / 450 MHz, Reverse polarity, R750, MPS566.