To store depths using an echo sounder

1. Connect the echo sounder to the controller using a cable or Bluetooth.
2. Configure the Echo sounder settings in the survey style.
3. To store depths with measured points, use the continuous topo method for your survey type.

   The depth is displayed in the Continuous topo screen and in the map. If you have configured a Latency value in the survey style, the continuous topo points are initially stored without depths and later updated. When a latency has been configured, the depth that is displayed is an indicator that depths are being received but it may not be the depth that is stored with the point name that is displayed at the same time.

4. To change Latency and Draft values, tap Options. For more information, see To configure echo sounder settings in the survey style.

5. To disable storing depths with continuous topo points during the survey, tap Options and then clear the Use echo sounder check box.