Length or coordinate entry method

As you add each element to the alignment, fill out the fields required for the selected element type. For information on other element types, refer to the Trimble Access 道路 Help.

Line elements

To add a line to the alignment, select Line in the Element field and then select the method to construct the line:

If you select...	Then...
Azimuth and length	Enter the Azimuth and Length to define the line. The End north and End east fields automatically update.
End coordinates	Enter the End north and End east values to define the line. The Azimuth and Length fields automatically update.
Select end point	Enter the Point name. The Azimuth, Length, End north and End east fields automatically update.

If this line is not the first line to be defined, the Azimuth field displays an azimuth calculated from the previous element.

To edit the azimuth, tap next to the Azimuth field and select Edit azimuth. If the element is non tangential the icon at the start of the element is shown in red.