Get started

To get started with Trimble Access Mobile Inspector, you will need to install software to your field device. Depending on your requirements, you may need to set up a custom units file.

Software installation

You will need to ensure the following software is installed on your field device.

Infotech Mobile Inspector

The Infotech Mobile Inspector web application must be installed on your field device. This device must be registered with your Infotech construction management system.

For detailed instructions refer to the Infotech documentation available here: learn.infotechinc.com/guides/mobile-inspector-install-guide.pdf.

Trimble Access Mobile Inspector

Trimble Access General Survey, Trimble Access Mobile Inspector and the Trimble Measure service are available to install from Trimble Installation Manager.

Trimble Access Mobile Inspector is available as a perpetual or subscription license.

For more information, see Trimble Access installieren.

Units file

A Units file is included with the installation of Trimble Access Mobile Inspector. This is a file that contains the common point, length, area, and volume calculation units and their SI Converter.

You can create a custom Units file to support your preferred project naming conventions, abbreviations and custom unit definitions.

To create a custom Units file:

  1. Open File Explorer on the field device and go to C:\Program Files\Trimble\<Current Version of Trimble Access>\General Survey\Plugin\Trimble\MobileInspector.

  2. Make a copy of “MobileInspectorUnits.txt” and rename it as “LocalUnits.txt" and save this in the same directory.