CSV import file format requirements

The comma delimited file imported into the Points list can contain the following information:

Field...	Contains...
1	Point name
2	First ordinate (Northing)
3	Second ordinate (Easting)
4	Elevation
5	Code
6	Description 1
7	Description 2
8	Target height (true vertical)
9	Target type or Prism constant
10	Target mode

The file must contain the first four fields. All other fields are optional. If fields 8 to 10 are null, the file can still be imported but the targets must be manually edited in the Monitoring software before you can continue. To do this, select the point in the list and tap Edit.

The Northing, Easting, Elevation, Target height, and Prism constant must be in the same units as the current job.

Field 9 shows the prism name if you are using a Trimble target, or the prism constant if you are using a custom target. The following table shows the allowable prism types and the applicable prism constants:

Prism type	Prism constant
VXSSeriesMultiTrack	0.010
SSeries360Prism	0.002
SSeriesTraversePrism	-0.035
Small318mmTiltablePrism	0.000
Large635mmTiltablePrism	0.000
MiniPrism	-0.018
SuperPrism	0.000
Monitoring25mmPrism	-0.017
Monitoring62mmPrism	-0.040
Controlpoint62mmTiltablePrism	0.000

The Target mode field may contain one of the following:

Field 10 options	Details
DR	DR on
AutolockOff	Autolock off
AutolockOn	Autolock on, Target ID off
a number between[1] and [8]	Autolock always on, using the specified Target ID . Note that Target ID is not used by the Monitoring software so this is ignored and Autolock is used.
FineLock	FineLock on
LongRange FineLock	LR FineLock on

If you import a point, and a point of the same name already exists in the Points list, the imported point has _1 appended to the name.