Tally folder files

The tally file and its associated files are stored in the Trimble Data\Common\Tally folder on the controller.

The Tally folder contains the following files:

File	Type	Contains	Notes
Tally	.csv	Joint attribute data	When working with cloud projects, this file is downloaded to the controller. When not working with cloud projects, this file is created when: A CSV file (such as the pipe manufacturer manifest) downloaded to the controller is opened in the Check tally or Create tally screen. A new file is created in the Create tally screen.
Manifest	.csv	Joint attribute data	This CSV file from the pipe manufacturer may be downloaded to the controller for checking against data entered in the Create tally screen.
Definition	.dfn	Configured tally options	This file is downloaded to the controller, or automatically created when tally options are configured in the Pipeline options screen.
Primary index	.idx	Unique ID, status flags, and timestamp and position information for each joint	This file is downloaded to the controller, or automatically created when tally options are configured in the Pipeline options screen.
Joint map	.map	Joint map records, including timestamp and position information	This file is downloaded to the controller or automatically created the first time a joint map record is added to the pipeline project.

The .idx file may contain any of the following flags:

0 – The joint has not been checked or modified

1 – The joint has been checked

2 – Existing attribute values for the joint have been modified

3 – The joint has been checked and modified

4 – The joint is a PUP

5 – The joint is a PUP and has been checked

6 – The joint is a PUP and has been modified

7 – The joint is a PUP and has been checked and modified

Position information in the .idx and .map file is provided as Lat, Long, Height values, then Northing, Easting, Elevation values, followed by the Station value.