Using the pole mount
An optional accessory for the TSC7 controller / Ranger 7 data collector, the pole mount consists of two parts:
-
the pole-facing part
-
the TSC7 controller / Ranger 7 data collector-facing part.
The two parts are connected using a connector that is compatible with other
The pole-facing part is compact, so that it fits into a 10 cm (4”) pipe for storage.
The TSC7 controller / Ranger 7 data collector-facing part has an arm which can be set up for left- or right-hand usage. To switch it from one side to the other, unscrew the black screws in the cradle plate where the device sits, rotate the cradle plate, then screw it back into place.
The TSC7 controller / Ranger 7 data collector “snaps” easily into the cradle. To use the TSC7 controller / Ranger 7 data collector on the pole mount, first sit the bottom of the TSC7 controller / Ranger 7 data collector into the hook at the bottom of the cradle, then push it firmly into the snap lock.
To remove the TSC7 controller / Ranger 7 data collector from the cradle, on the back of the locking mechanism pull the lever TSC7 controller / Ranger 7 data collector to release the device.
