Generate Reports

Click the Map icon (map pin) on the left side of the screen.
On the Actions bar, click the More icon (vertical ellipsis) and select Settings > Exports > (one of these reports):

Summary - A snapshot of the map on screen and a pie chart for the selected quality metrics. This report is used to share any 3D productivity data.

Station & Offset - A statistical report used for roading projects. This report reports raw machine values instead of a Quality Metrics summary. Using an imported alignment file (such as a road centerline), you can select spatial areas to report raw machine values for.

Select the raw Quality Metric (you can choose multiple). If you select Cut/Fill, select the Design. You can select more than one cut/fill metric.
Select the Alignment file.
Enter the Start Station and End Station values for the Alignment file (up to three decimal places).
Enter the Cross-Section Interval value for reporting frequency (up to three decimal places).
Enter the Left Offset and Right Offset values to the left and right of the alignment centerline. You can enter multiples of each (up to three decimal places).
Select a Favorite filter or current filter (default).

Grid - A statistical report used for any construction project. This report reports raw machine values instead of a Quality Metrics summary. You can select and rotate spatial area grids of data to report raw machine values for.

Select the raw Quality Metric (you can choose multiple). If you select Cut/Fill, select the Design. You can select more than one cut/fill metric.
Enter the Grid Interval value (up to three decimal places).
Select the Grid Origin (Automatic or Manually Define). If you select Manually Define:
- Enter the Grid Origin in northing/easting values (up to three decimal places).

Enter the Grid Rotation in northing/easting values or an Azimuth in degrees value (up to three decimal places from 0.001 to 360.000).