Bluetooth Configuration

Select Bluetooth / Configuration.

 

Pairing Timer – For receivers with firmware version 5.44 or later and that have the Enhanced Security option installed, when the receiver is turned on, an 18-hour pairing timer starts.

During this time the Bluetooth module is discoverable by external devices. After the countdown has elapsed, or after a device is paired with the receiver, the Bluetooth module is no longer discoverable.

While the timer is active, the Bluetooth Info menu will show that the module is discoverable.

To manually start the timer, click Start Now. Alternatively, to restart the timer without accessing the web interface, turn the receiver off and then back on.

Auto-pair at Startup – When enabled, the device is discoverable for pairing for 18 hours after the receiver is powered up. This field only appears if the Enhanced Security option is installed.

Discoverable – This field is only shown if the Enhanced Security option is not installed. Set this field to True or False. When this field is set to True, the receiver will be shown when it is discovered by another Bluetooth-enabled device. If this field is set to False, the receiver is not shown in the discovery list.

Pin Code – The password that is required to pair the receiver with another Bluetooth-enabled device. The pin code is user-defined and should consist of at least four numbers.

Bluetooth PAN IP Address – The default is 192.168.143.1. However if there is a conflict, the 143 subnet can be changed.

Click OK to apply any changed settings to the receiver.