Best Practices When Using Single-3D Guidance

The following best practices are recommended:

• Maintain the machine in good condition to remove the play in joints that is caused by excessive wear.
• Ensure that the system has an accurately calculated orientation by moving the machine when prompted to do so. An accurately calculated orientation is required for accurate guidance.

GNSS

• Select the GNSS Precision Tolerance suitable for your application from the System Settings menu.

  NOTE – The acceptable precision values are set in the Web Interface.

Specifying machine direction of travel

If you are using single 3D guidance, the system displays an orange Move Machine operational state message at start-up. When the machine is moved, and during normal operation, the system determines when the machine is traveling forward and when it is traveling in reverse. If the determined direction is incorrect at any time, tap the direction of travel shortcut button to manually set the direction.