Joystick Switches on Bobcat Compact Track Loader Machines

You can use certain switches on the joysticks to perform common tasks while keeping your hands close to the machine controls. The joystick switches only function when you are in the work screen.

The Bobcat supported attachments are the HD96 and HD108 grader blades.

The joystick switches shown in the image below let you:

• Engage Autos.

  Each press of the auto switch (3) cycles between Auto and Manual.

  NOTE – Only the Auto side(s) that is armed will engage.

• Increase or decrease the elevation offset or the target cross slope using the increment (1) and decrement (2) switches.

  Depth and Slope mode or Design mode	Operator + Cross Slope sensor combination
  Increase or decrease the elevation offset.	Increase or decrease the target cross slope.

1	Decrement switch
2	Increment switch
3	Auto/Manual switch