Activity

This page shows general information about the current state of the receiver.

Select Receiver Status / Activity.

 

Satellites Tracked – Shows a list of all the satellites that the receiver is currently tracking. The number of satellites being tracked depends on controls specified on the Satellites and Receiver Configuration pages. This list contains the GPS, GLONASS, BeiDou, Galileo, IRNSS, and SBAS satellite IDs that are being tracked.

Data Logging – If the Data Logging option is installed and Logging is enabled, the name of the data file currently being logged appears.

Input/Output – A list of all input and output activity currently enabled in the receiver.

Temperature – Displays the internal temperature of the receiver. This value is typically 10 °C higher than the ambient temperature.

Runtime – Displays the current uptime of the receiver. The runtime value is reset to zero when you restart the receiver.

Power Source – Displays the current source of power to the receiver.

USB Profile – Displays the type of USB device that is connected to the receiver.

Wireless Connections – Displays a list of wireless connections and their status, the list may include Wi-Fi access point, Wi-Fi client and Bluetooth PAN if available and connected.

Disk – If the Data Logging option is activated, the current availability of the internal memory will be shown.

Port 1, Port 2, USB – Displays the estimated percentage of power remaining. The voltage of the power source is also shown.