Cables and accessories

The following accessories are available for purchase. Please contact your Trimble dealer.

GNSS AC power kits

These AC power kits are suitable for office (internal) use only. The GNSS-AC-USB kit is recommended as a standard accessory.

  • International (P/N GNSS-AC-INT)

  • China (P/N GNSS-AC-CHN)

  • Japan (P/N GNSS-AC-JPN)

  • USB-C wall charger with cable (P/N GNSS-AC-USB)

Power accessories

Most of these accessories are already available in one of the power kits. A USB-PD power pack can be purchased locally. For recommendations, see External power.

  • Adapter – USB power AC, 5/9 V, 3.0 A, 100 V AC to 240 V AC, 30 W, Global (P/N 121928-01)

  • Cable, USB-C to USB-C charge and sync cable (P/N 121920-01)

  • Power supply – 65 W, 19 V, 3.43 A, 100 V AC to 240 V AC (P/N 107000)

  • Power cord kit – USA, EU, UK, AUS with C7 connector (P/N 78651)

GNSS antennas

Select the appropriate GNSS antenna. See GNSS antenna chart.

  • Zephyr 3 Rover (boxed) (P/N 105000-50)

  • Zephyr 3 Rugged with 5/8" mounting bracket (P/N 125000-30)

  • Zephyr 3 Rugged with mast mounting bracket (P/N 125000-10)

  • GA830, GNSS/MSS(Global)/Beacon, Marine (P/N 44830-00)

Cables

Recommended cable combinations for LEMO and DB26 connectors on the receiver using a DC power source

LEMO: for external lead acid battery:

  • Cable – Power, 3 m (10 ft), LEMO 0S7P(M) to battery clips (P/N 46125-20)

LEMO: combination 3.3 m, external lead acid battery, COM1:

  • Cable – Data/Power, 1.5 m, DB9(F) to LEMO 0S7P(M) to LEMO SAE (P/N 59044-10)

  • Cable – Power, 1.8 m, SAE to battery clips (P/N 83223-02)

DB26: Adapter for power, ethernet and COM2:

  • Adapter DB26 to DB9 ethernet and power (P/N 57168)

DB26: combination 2.3 m, external lead acid battery, COM2/3/4, ETH, 1PPS:

  • Cable – Data/Power, 0.5 m, DB26(F) to DB9(F) / DB9(M) /RJ45(F) / BNC / SAE (P/N 78235-10)

  • Cable – Power, 1.8 m, SAE to battery clips (P/N 83223-02)

2.7 m DC SAE extension cable for SAE power cables above:

  • Cable – SAE-to-SAE power cable, 2.7 m (9 ft) (P/N 51862-00)

DC power and data cables

  • Cable – 1.5 m Dual 0S/7P/M to SAE power (P/N 67384-10 )

  • Cable – Data/Power 1.5m DB9(F) to 0S/7P/M to SAE (P/N 59044-10 )

  • Power 0.6 m 7P Lemo to SAE R750 MPS566 (P/N 95715)

  • Cable – Data/Power 0.5 m DB26(F) to DB9(F) / DB9(M) / RJ45(F) / BNC / SAE (P/N 78235-10 )

  • Cable – Power 1.8 m SAE to battery clips (P/N 83223-02)

  • Cable – SAE-to-SAE power cable 2.7M (9') (P/N 51862-00)

  • Cable – Adapter, 0.15 m, SAE to DC socket (2.1 mm) (P/N 88769-00)

  • Cable – Power 3 m (10ft) LM0 to battery clips (P/N 46125-20 )

  • Cable – Splitter, 0.25 m, SAE to SAE/SAE (P/N 89073-00)

  • Adapter, DB26-to-DB9, ethernet and power (P/N 57168)

  • USB-C to USB-C charge and sync cable (P/N 121920-01)

MPS566 / MPS566-2 receiver to an external UHF radio

LEMO: For external TDL450H radio on COM1 – Cable ships with TDL 450H kits:

  • TDL 450H radio, LEMO 0S7P(M) to LEMO 1S5P(M) and SAE power (P/N 66656-10)

DB26: For external TDL510 radio on COM2 – P/N 78235-10) or P/N 57168 connects to:

  • TDL 510 radio, P/N 128287: Cable - Office/third-party cable TDL510 radio. SAE to DE-9 to DA-15

Antenna cables

  • GPS 1.6 m, TNC/TNC right angle (P/N 58957-02)

  • GPS 5 m, TNC/TNC right angle (P/N 58957-05)

  • GPS 10 m, TNC/TNC right angle (P/N 58957-10)

  • GPS 15 m, LMR-200 TNC/TNC right (P/N 58957-15)

  • GPS 30 m, TNC/TNC right angle (P/N 58957-30)

  • GNSS 5 m, TNC-to-TNC LMR400-UF, P/N 92296-05

  • GNSS 10 m, TNC-to-TNC LMR400-UF, P/N 92296-10

  • GNSS 15 m, TNC-to-TNC LMR400-UF, P/N 92296-15

  • GNSS 20 m, TNC-to-TNC LMR400-UF, P/N 92296-20

  • GNSS 30 m, TNC-to-TNC LMR400-UF, P/N 92296-30

  • Adapter for RA TNC/TNC, P/N 111760

UHF accessories - 450 MHz

The UHF connector (450 MHz and 900 MHz) on the receiver is reverse polarity TNC (RP-TNC), P/N 56510-6x are the recommended kits containing cable P/N 129808-05. The 6" rubber whip antenna (P/N 123588) can be used for both 450 MHz and 900 MHz models. P/N 119128 TNC adapter can be used with older UHF accessory kits (PN 56500-6x).

  • Antenna – UHF, 6" rubber whip, 900 MHz / 450 MHz, reverse polarity, R750 (P/N 123588)

  • Kit – External UHF antenna, 430 MHz to 450 MHz, R750 (P/N 56510-64)

  • Kit – External UHF antenna, 450 MHz to 470 MHz, R750 (P/N 56510-66)

  • Bracket – Remote SiteNet 900 or SiteNet 450 radio antenna (new base station) (P/N 49102)

  • Cable – NMO/RP-TNC adapter cable (5 m LMR-200) (P/N 129808-05)

  • Cable – NMO/RP-TNC adapter cable (15 m LMR-200) (P/N 129808-15)

  • Cable – NMO/RP-TNC adapter cable (30 m LMR-400) (P/N 129808-30)

  • Radio – Radio antenna, 0 db to 5 db whip, 430 MHz to 450 MHz (P/N 24253-44)

  • Radio – Radio antenna, 0 db to 5 db whip, 450 MHz to 470 MHz (P/N 24253-46)

  • Adapter – 450 MHz RF, TNC jack to RP (P/N 119128) - Can be used with older UHF accessory kits (P/N 56500-6x)

UHF accessories - 900 MHz

The UHF connector (450 and 900 MHz) on the receiver is reverse polarity TNC (RP-TNC), P/N 56510-6x is the recommended kit containing cable P/N 129808-05. The 6" rubber whip antenna (P/N 123588) can be used for both 450 MHz and 900 MHz models.

  • Antenna – UHF, 6" rubber whip, 900 MHz / 450 MHz, reverse polarity, R750 (P/N 123588)

  • Kit – External UHF antenna, 900 MHz, R750 (P/N 56510-90)

  • Antenna - Radio, 8" rubber whip, 900 MHz, reverse polarity (P/N 32319)

  • Bracket – Remote SiteNet 900 or SiteNet 450 radio antenna (new base station) (P/N 49102)

  • Cable – NMO/RP-TNC adapter cable (5 m LMR-200) (P/N 129808-05)

  • Cable – NMO/RP-TNC adapter cable (15 m LMR-200) (P/N 129808-15)

  • Cable – NMO/RP-TNC adapter cable (30 m LMR-400) (P/N 129808-30)

  • Radio – Radio antenna, 5 db whip, 896 MHz to 940 MHz (P/N 24253-92)

Mounting bracket

For surface or bulkhead mounting:

  • Kit – Mounting bracket with screws, R750/MPS566 (P/N 128018-00)

  • Tripod clip with mounting screws, R750/MPS566 (P/N 51702-00)

  • Non-slip inserts for bench mounting × 8 (P/N 131978)

Transport case

  • Transport case, R750/MPS566 (P/N 101750-00)