System Specifications

TABLET: A Trimble T10x Tablet has the below specifications. If you use a commercial tablet instead, ensure it has to meet the minimum specifications of the T10x tablet:

  • Operating System: Microsoft® Windows 10 and 11 (64 bit)

  • System:

    Energy efficient Intel 10th Generation Core™ i7 Processor

    32 GB RAM

    1 TB Storage

    10.1 in (256 mm) 1000 Nits 1920 x 1200 LCD Screen

    8 MP rear camera

    High capacity hot swappable batteries

  • Communication:

    Wi-Fi 802.11ax

    USB 3.0 x1

    LAN Port RJ45 x1

It is recommended updating the graphic card of your tablet with the most recent version of the driver. Please visit the manufacturer website to get the most recent driver version.

DESKTOP & LAPTOP: The Trimble Perspective software can be installed and run on a Windows desktop (or laptop) instead of on a Trimble T10x Tablet. The minimum specifications should be similar to or higher than the T10x Tablet ones.

TRIMBLE PERSPECTIVE: Throughout this user guide, the Trimble Perspective software will be referred to as the software, or the application.

TRIMBLE 3D LASER SCANNER: A Trimble X series is a 3D laser system. Throughout this user guide:

  • The Trimble X7 3D laser system will be referred to as the X7 scanner or .

  • The Trimble X9 Core (500 kHz - 80 m) or Premium (1000 kHz - 150 m) 3D laser system will be referred to as the X9 scanner or .

  • The Trimble X12 3D laser system will be referred to as the X12 scanner or .

It is recommended updating the scanner with the most recent version of the firmware. Use Trimble Installation Manager for Windows to update your scanner firmware. For more information, refer to the user guide of the respective scanner.

MEMORY CARD: Trimble recommends using SDHC memory cards (which are by default formatted in the FAT32 file system) with a minimum size of 32GB, a class 10 speed and a temperature ranging from -20°C to 85°C. If you choose to use an extended capacity SDXC memory card, it must meet the specifications given above and must be formatted in the FAT32 file system.

Use the Storage management features of the Trimble Perspective software to ensure that the SDXC memory card is formatted in the FAT32 file system. See Settings > Scanner.