Button functions

The receiver has only one button, the Power button.

To...	Press the Power button...	LED behavior	Notes
turn on the receiver	...and release immediately
turn off the receiver	...and hold for more than 2 seconds but less than 15 seconds	Green: Off after 2 seconds. Yellow: On after 2 seconds and remains On till shutdown complete.
clear the ephemeris file and reset the receiver to the factory defaults	...and hold for more than 15 seconds but less than 30 seconds	Green: Off after 2 seconds. Yellow: On after 2 seconds and then Slow Flash after 15 seconds to indicate 15 seconds has elapsed.	If the button is released, the 15 seconds data is cleared. The yellow flash continues until the operation is complete. The receiver then enters the reboot cycle.