Conventional measurement with servo

The Trimble SPS Series Total Station is equipped with the servo system, which provides the following advantages for conventional measurement:

• When combined with Trimble field software:

  • the instrument calculates and automatically aims towards the calculated position of the selected point, when setting/staking out.

  • the instrument will automatically point towards a selected reference target to check for instrument movement during measurements.

• SurePoint™ technology corrects the instrument pointing for mislevelment and collimation / trunnion axis tilt errors in real time.

• SurePoint technology restores the instruments pointing after accidental bumps, vibration or wind.

• The servo drives are continuous and endless allowing for rapid repeat manual pointing of the instrument with no end stops.