Firmware version information

  1. Press to scroll to Firmware version and then press . The instrument firmware version appears on the screen. The program will return automatically to the Setup menu.

Servo demo mode

When the firmware version is shown in the face 2 display it is possible to enter a servo demo mode. The servo demo function demonstrates the high speed capability of the servo system.

CAUTION – The instrument will start to rotate at high speed both horizontally and vertically. Make sure that the instrument has a stable setup before starting the demo.

  1. Press to scroll to Firmware version and then press . The instrument firmware version appears on the screen.

  2. While the firmware version is displayed, press .

  3. When Spinning demo appears in the display, press to start the demo, or press to cancel and return to the Setup menu.

  4. To end the spinning demo, press to stop rotation and return to the Setup menu.