Radio settings

In the Radio settings menu it is possible to set the radio channel and network ID number.

Set radio channel

1. Press to scroll to Radio settings and then press .

2. Press to scroll to Set radio channel and then press .

3. To change the radio channel number press to select Next and then press to change the channel number in the display.

   NOTE – A short press on the enter key will increment the radio channel in increments of 1. Pressing and holding the enter key will increment the radio channel in steps of 10.

4. When you have found the channel number of your choice press to select Set and then press to store this channel number. You will then be returned to the Radio Settings menu.

5. If you want to cancel, press to select Cancel and then press to return to the Radio Settings menu.

6. To return to the Setup menu press to scroll to Back and then press .

Each combination of channel and network ID is unique, however try to keep each SPS system on a separate radio channel to avoid any likelihood of conflict.

Set Network ID

1. Press to scroll to Radio settings and then press .

2. Press to scroll to Set network ID and then press .

3. To change the network ID number press to select Next and then press to change the channel number in the display.

   NOTE – A short press on the enter key will increment the network ID in increments of 1. Pressing and holding the enter key will increment the network ID in steps of 10.

   Network ID range is 0-255.

4. When you have found the network ID number of your choice press to select Set and then press to store this network ID number. You will then be returned to the Radio Settings menu.

5. If you want to cancel, press to select Cancel and then press to return to the Radio Settings menu.

6. To return to the Setup menu Press to scroll to Back and then press .

Each combination of radio channel and network ID is unique, however try to keep each SPS system on a separate channel to avoid any likelihood of conflict.