Regulatory information

Regulatory models: SX12‑100 (long range radio) and SX12‑200 (Wi‑Fi HaLow™ radio).

Information about included radio modules

Regulatory model SX12‑100 (long range radio) SX12‑200 (Wi‑Fi HaLow™ radio)
Radio modules

Long range radio module, frequency band 2.4 GHz, max RF output power +20 dBm.

WLAN radio module, frequency band 2.4 GHz, max RF output power +20 dBm.

Wi‑Fi HaLow radio module, frequency band 902 to 928 MHz, max RF output power +24 dBm.

WLAN radio module, frequency band 2.4 GHz, max RF output power +20 dBm.
Regulatory note ‑ For use in USA, Canada, Australia* and New Zealand* only.

*With limited frequency band 915 to 928 MHz.

This equipment complies with the FCC & ICES RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and any part of the human body.

Europe

NOTE – The CE marking and the following directives apply to the SX12‑100 only.

Hereby, Trimble, declares that the SX12 scanning total station are in compliance with the following directives:

  • Machinery Directive 2006/42/EC

  • RED 2014/53/EU

  • RoHS Directive 2011/65/EU

Notice to our European Customers

For product recycling instructions and more information, please go to: trimble.com/en/our‑commitment/responsible‑business/product‑compliance/environmental‑compliance.

USA

Supplier's Declaration of Conformity

47 CFR § 2.1077 Compliance Information

Unique Identifiers: Trimble SX12‑100 and SX12‑200

Responsible Party

Trimble Inc.
4450 Gibson Drive, Tipp City,
OH 45371 USA
trimble.com

FCC Compliance Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE – This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.

  • Increase the separation between the equipment and receiver.

  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

  • Consult the dealer or an experienced radio/TV technician for help.

CAUTION – Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.

Canada

This Class B digital apparatus complies with Canadian ICES‑003.

This device contains licence‑exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence‑exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

The radio transmitters 4492A‑2420, 4908A‑PMACS and 4908A‑SXNEWAH have been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device:

  • Antenna LRR + Wi‑Fi (SX12‑100): part number 55001508, antenna gain 2 dBi.

  • Antenna Wi‑Fi HaLow + Wi‑Fi (SX12‑200): part number 55003790, antenna gain <1.7 dBi.

Cet appareil numérique de la classe B est conforme à la norme NMB‑003 du Canada.

L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :

  • L'appareil ne doit pas produire de brouillage;

  • L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Le présent émetteur radio 4492A‑2420, 4908A‑PMACS et 4908A‑SXNEWAH a été approuvé par Innovation, Sciences et Développement économique Canada pour fonctionner avec les types d'antenne énumérés ci‑dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est supérieur au gain maximal indiqué pour tout type figurant sur la liste, sont strictement interdits pour l'exploitation de l'émetteur :

  • Antenne LRR + Wi‑Fi (SX12‑100) : Trimble numéro de référence 55001508, gain d'antenne 2 dBi.

  • Antenne Wi‑Fi HaLow + Wi‑Fi (SX12‑200) : Trimble numéro de référence 55003790, gain d'antenne <1.7 dBi.

Brasil

Regulatory model: SX12‑100.

Para maiores informações, consulte o site da Anatel www.gov.br/anatel/pt‑br/. Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados.

Argentina

Regulatory model: SX12‑100.

C‑29384

Specification

Power rating

Power input 12 V DC, 20 W.

Environmental specification

IP classification: Dust protected / Protected against water jets from nozzle. IP55
Operating temperature range ‑20 °C to +50 °C (‑4 °F to +122 °F)
Humidity 100%, condensing

For further technical specifications, refer to the SX12 Scanning Total Station data sheet available from trimble.com.