Utility Pipe - Rectangular Utility Line Options

Use these options to describe segments of utility line/pipe or cable that are rectangular.

Inside width
Inside height
Wall thickness

Figure: Rectangular pipe dimensions


Options
Name	Type a descriptive name for the site improvement as you want it to appear in various commands that use pipes. These names should generally include size information to make object types easier to distinguish from each other.
Utility type	Select a Type for the network you will use this pipe in; it will not appear as an option for other types of networks. Gravity - Select this to create a sanitary sewer, storm sewer, or other non-pressurized system that relies on gravity to move liquids. Pressurized - Select this to create a water, gas or other system that relies on pressure to move liquids. Cable - Select this to create an electrical, telecommunications, cable tv or other system of cables (which may be inside conduit pipes).
Material	Specify the material that will be used to construct the utility line. You can use this text field to describe other properties, as needed. Note: You can define a length-based site improvement without a material, if appropriate.
Class	Enter the industry type or rating of the pipe (e.g., pressure or thickness). You can also use this text field to describe other properties, as needed.
Inside width	Enter the interior distance from one side of the pipe to the other in small units.
Inside height	Enter the distance from the invert to the highest point inside the pipe in small units.
Thickness	Enter the thickness of the pipe's wall in small units.
Color	Select a default display color for the pipes as you want them to appear in graphic views. This can be changed in the properties for each object once they are created in your model.
Unit cost	Enter the procurement unit cost of the pipe segment (per linear unit). Note: This program displays the currency symbol and format that you have set in Microsoft Windows^® Regional and Language Options. The units and calculations, however, are not associated with a specific currency, so if a project is opened on a computer with different regional settings, those currency symbol and formats are used, but no conversion between currencies has been made.
Unit weight	Enter the weight of the pipe or cable segment.
Unit length	Enter the nominal length of the pipe or cable segment.
Primary inspection Additional inspection	Inspection criteria is currently not implemented.