Add/Remove Members to the Station and Offset View

Use the Add/Remove Members to Station/Offset View command, to add, linestrings, polylines or polygons to the Station and Offset View. These objects will be displayed relative to the Station and Offset Views alignment. You can also use this command to remove an object from the Station and Offset View without deleting it from other views.

Prerequisite:

• Station and Offset View

To access the command:

• Select Add/Remove Members in Corridors > Station/Offset.

To add lines, polylines or polygons to the Station and Offset View:

1. In the Alignment list select the alignment that the Station and Offset View is based on.
2. To add members to the Station and Offset View, click in the Members to add or remove box, then in the Plan View, select the lines, polylines and polygons that you want to add to the Station and Offset View.
3. ClickAdd.

To remove lines, polylines or polygons from the Station and Offset View:

1. In the Alignment list select the alignment that the Station and Offset View is based on.
2. To remove members from the Station and Offset View, click in the Members to add or remove box, then in the Station and Offset View, select the lines, polylines and polygons that you want to remove from the Station and Offset View.
3. Click Remove.

   The object is removed from the Station and Offset View but will continue to be visible in other views.

   Note: If an object is deleted from any view, it will be removed from all views.