Map tap and hold options

Tap and hold in the map area to quickly select a common task. The tasks available depend on the number and type of features selected, and whether the features are in the job or in a linked file.

Tap and hold menu options for features selected in the map that are in the current job

Task	Features in the job selected in the map
Task	No Features	One point	Two points	Three or more points	Line	Arc	Polyline
Review	–	*	*	*	*	*	*
Select	*	*	*	*	*	*	*
CAD toolbar	*	*	*	*	*	*	–
Store a point	*	–	–	–	–	–	–
List selection	–	*	*	*	*	*	*
Clear selection	–	*	*	*	*	*	*
Delete	–	*	*	*	*	*	*
Stake out point	–	*	*	*	–	–	–
Stake out line	–	–	*	–	*	–	–
Stake out arc	–	–	–	–	–	*	–
Stake out polyline	–	–	–	–	–	–	*
Measure calibration point	–	*	–	–	–	–	–
Navigate to point	–	*	–	–	–	–	–
Turn to	*	*	–	–	–	–	–
Compute inverse	–	–	*	*	–	–	–
Area calculations	–	–	–	*	*	*	*
Compute intersection	–	–	–	–	*	*	*
Subdivide a line	–	–	–	–	*	–	–
Subdivide an arc	–	–	–	–	–	*	–
Offset line/polyline	–	–	–	–	*	–	*
Key in point	*	–	–	–	–	–	–
Key in line	–	–	*	–	–	–	–
Key in arc: 3 points	–	–	–	*	–	–	–
Key in arc: 2 points + center	–	–	–	*	–	–	–
Key in polyline	–	–	*	*	–	–	–
Create surface	–	–	–	*	–	–	–
Compute volume	–	–	–	*	–	–	–
Set point details	*	*	–	–	–	–	–
Check backsight	*	–	–	–	–	–	–
Check shot	–	*	–	–	–	–	–

If you select a point with the same name as another point in the job, and then select Review or Delete, a list of the duplicate points appears. Select the point you want to review or delete.
Turn to is available in a conventional survey when a station setup has been completed, no points are selected, and the map is in Plan view.
Check backsight and Check shot options are available only in conventional surveys.
The Key in point option is only available when no point is selected and the map is in Plan view.
The Set point details option is not available when the CAD toolbar is displayed in the map.
There are fewer tap and hold menu items available when you are using the CAD toolbar in drawing mode.

Tap and hold menu options for features selected in the map that are in a linked file

Task	Features from linked files selected in the map
Task	One point	Two points	Three or more points	Line	Arc	Polyline
Review	*	*	*	*	*	*
Select	*	*	*	–	–	–
CAD toolbar	*	*	*	*	*	*
List selection	*	*	*	*	*	*
Clear selection	*	*	*	*	*	*
Delete	–	–	–	–	–	–
Stake out point	*	*	*	–	–	–
Stake out line	–	*	–	*	–	–
Stake out arc	–	–	–	–	*	–
Measure calibration point	*	–	–	–	–	–
Navigate to point	*	–	–	–	–	–
Turn to	*	–	–	–	–	–
Compute inverse	–	*	*	–	–	–
Area calculations	–	–	*	*	*	*
Compute intersection	–	–	–	*	*	–
Subdivide a line	–	–	–	–	–	–
Offset line	–	–	–	*	–	–
Subdivide an arc	–	–	–	–	–	–
Key in point	–	–	–	–	–	–
Key in line	–	*	–	–	–	–
Key in arc: 3 points	–	–	*	–	–	–
Key in arc: 2 points + center	–	–	*	–	–	–
Create surface	–	–	*	–	–	–
Compute volume	–	–	*	–	–	–
Set point details	*	–	–	–	–	–
Check backsight	*	–	–	–	–	–
Check shot	–	–	–	–	–	–

If you select one or more triangles in a surface (TTM files only), the Delete selected triangles option is available from the tap and hold menu.
You cannot use Trimble Access to delete points from linked files. Points from linked files do not appear in the Review screen list of deletable points.
Turn to is available in a conventional survey when a station setup has been completed, no points are selected, and the map is in Plan view.
Check backsight and Check shot options are available only in conventional surveys.
The Set point details option is not available when the CAD toolbar is displayed in the map.
There are fewer tap and hold menu items available when you are using the CAD toolbar in drawing mode.