Working with mobile broadband
The TSC5 controller / Ranger 5 data collector has an integrated cellular modem enabling you to connect to a mobile broadband network. The TSC5 controller / Ranger 5 data collector supports Worldwide LTE (where available), and is compatible with AT&T- and Verizon-certified
Before you can send and receive data over mobile broadband, you must have a microSIM card in the device (see Inserting a MicroSIM card (optional)). You must then turn on Cellular data on the TSC5 controller / Ranger 5 data collector and configure the connection.
Using mobile data
You can adjust how your device uses mobile data by changing your cellular network settings.
Depending on your carrier and service plan, your device may connect automatically to your carrier’s fastest available data network. Or you may need to choose settings and use a SIM card for a specific carrier.
To adjust cellular network settings:
-
From the Apps screen, open the Settings
app.
-
Tap Network & Internet, then tap Mobile network.
-
Adjust the settings as required:
-
Mobile data. Access data using mobile network.
-
Roaming. Let your device transmit data over other carriers’ networks when you leave an area covered by your own carrier’s networks.
-
App Data usage.
-
Locating the device's IMEI number
The IMEI number is a unique 15-digit number that identifies the cellular module installed on your device. Your mobile broadband operator may need to know the IMEI number of your device to register the device with the network and activate your mobile broadband data plan.
The IMEI number is printed on the serial number label located in the
Alternatively, to check the IMEI number in the operating system:
-
From the Apps screen, open the Settings
app.
-
Tap About device.
-
Tap IMEI.
If you cannot find the IMEI number for your device, or you do not have the device with you, contact your reseller.