To upgrade a license
This topic describes how to upgrade a license that you have already added to the Virtual Warehouse:
Watch the video:
Refer to the following steps:
-
Under Perpetual Licenses, in the Assign/Upgrade tab, click
next to the Serial Number field at the top of the Hardware Variants panel and enter the serial number/Key ID. Select the matching Key ID tile. - To change the items assigned to the Key ID:
- To upgrade the software edition, click Add Edition Software. Software editions that can be upgraded to from the current edition are shown. Select the edition to upgrade to and click Assign. If required, repeat this step to upgrade to the required edition.
- To assign additional software modules, click Assign Modules in the item's tile in the Configuration panel. Select the module(s) and the appropriate sales order/purchase order number and click Assign. Review your changes and click OK.
To extend the software maintenance, click Assign Trimble Protection Plans in the item's tile. Select the Protection Plan(s) to apply and click Assign. Review your changes and click OK.
For more information, see Trimble Protected Plans and factory warranties.
To add more software seats, click Add More Seats. Select the number of seats and click Assign. In the confirmation message, click OK.
Additional seats have a different part number to the initial seat that is assigned when you select the software edition.
To use stock from multiple sales or purchase orders starting with the oldest order, select the Assign from total stock (using oldest first) check box when selecting items.
-
To generate the 19-digit product key that the customer will use to activate the changes to the Key ID, click Send Product Key To Customer near the bottom of the Configuration panel.
To cancel a product key that has been generated, contact Geospatial_Support@trimble.com.
-
Click OK to send the generated product key to the customer.
Dongle to Network upgrades are not managed in the Virtual Warehouse at this time.
