Available upgrades
Available upgrades may differ by region.
Rover Precision configurations
Select one of the rover configurations to suit the precision required for your application:
-
Precise Rover with RTK Base (P/N MPS566-CFG-PR): Trimble MPS566, GPS/GLN/GAL/BDS, 3F, MSK, QZSS, QZSS CLAS (Japan), HDG, SBAS, LTE, MB, 50 Hz
-
10/02 Rover (P/N MPS566-CFG-1002): Trimble MPS566, GPS/GLN, 3F, MSK, QZSS, QZSS CLAS (Japan), SBAS, HDG, LTE, MB
-
10/10 Rover (P/N MPS566-CFG-1010): Trimble MPS566, GPS/GLN, 3F, MSK, QZSS, QZSS CLAS (Japan), SBAS, HDG, LTE, MB
-
30/30 Rover (P/N MPS566-CFG-MSK): Trimble MPS566, GPS/GLN, 3F, MSK, QZSS, QZSS CLAS (Japan), SBAS, HDG, MB
-
Precise Rover (ACP Pilot) (P/N MPS566-CFG-ACP): Trimble MPS566, GPS/GLN/GAL/BDS, 2F, HDG
Precise GNSS Heading capability is enabled by a Rover configuration.
QZSS CLAS is supported. QZSS CLAS provides centimeter-level nationwide positioning PPP-RTK correction service for Japan. Compact SSR correction format broadcast at 2,000 bps on the QZSS L6D signal. QZSS CLAS supports multi-GNSS including GPS, Galileo, and QZSS. Use firmware version 6.26 or later and enable QZSS L6D on the Tracking screen.
QZSS CLAS |
Static (95%) |
Kinematic (95%) |
---|---|---|
Horizontal accuracy |
≤ 6 cm |
≤ 12 cm |
Vertical accuracy |
≤ 12 cm |
≤ 24 cm |
Signal/Constellation upgrades
Receivers purchased from 1 April 2024 now include BeiDou and Galileo rather than being optional upgrades. If you have purchased a receiver before 1 April 2024, Trimble recommends that you upgrade the firmware using Trimble Installation Manager to benefit from the latest improvements.
Feature upgrades
Individual features (also known as options) can be added to a configuration if a required feature is not included.
-
50 Hz output
-
Attitude
-
Binary Outputs (GSOF, BINEX, RT17/RT27)
-
Heading Enable
-
Inertial (INS) + Attitude
-
LTE Enable
-
Moving Base
-
Precise Rover
-
Programmatic Interface (simple HTTP scripting for integration into other web-capable platforms)
-
RTK Base
-
SBAS
-
QZSS
If these additional features are installed, they are shown on the Receiver Options web page.