Standard features

Unless otherwise noted, this information covers both receiver models.

The label on your receiver shows if you have an R750 or R750-2. P/N 118500‑xx is an R750. P/N 218500‑xx is an R750-2.

These are the standard features. The receiver can be upgraded. See Available upgrades.

For full specifications, see Specifications.

  • Trimble CenterPoint® RTX for RTK level precision anywhere (rover upgrade not required) (subscription required).

    Receivers activated after 1 April 2024 includes a ready-to-use one year Centerpoint RTX subscription added at Trimble Installation Manager activation. At the end of the 12-month period, you can renew the CenterPoint RTX subscription at the listed price. For more information and instructions on how to configure Trimble RTX with your Trimble software, go to positioningservices.trimble.com/en/rtx-on-point.

  • Trimble OmniSTAR and Fugro MarineSTAR capable (rover upgrade not required).

  • 30 cm RTK rover capability (RTK correction source required).

  • Trimble xFill® technology for seamless RTK coverage during connection outages.

  • Trimble ProPoint® technology for superior performance in challenging GNSS conditions.

  • Maxwell™ 7 technology provides access to all trackable constellations for greater reliability. The R750-2 receiver contains a dual-chipset to track the latest signals from all GNSS constellations with improved EVEREST™ Plus multipath mitigation, interference detection, and protection against GNSS spoofing.

  • GNSS triple-frequency tracking:

    • BeiDou: B1, B1C, B2, B2A, B2B, B3

    • Galileo: E1, E5a, E5b, E5AltBOC, E6

    • GLONASS: L1-C/A, L2-C/A, L1P, L2P, L3

    • GPS: L1-C/A, L1C, L2E, L2C, L5

    • QZSS: L1 C/A, L1C, L1S, L2C, L5, L6, L6D, L6E

    • NavIC: L5-C/A

    • SBAS: L1-C/A, L5

  • Wi-Fi access point and client (depending on country compliance).

  • Internal LTE 4G modem with nano SIM slot (depending on country compliance):

    • Remote access

    • Network RTK

    • IBSS and other NTRIP correction sources

  • R750: Internal radio (depending on model): See Specifications and Compliance notices.

    • 450 MHz: 403 MHz to 473 MHz, 12.5 kHz or 25 kHz spacing, 0.5 W or 2 W transmit power

    • 900 MHz: 902 MHz to 928 MHz spread spectrum, 1 W transmit

  • R750-2: Internal radio (depending on model). See Specifications and Compliance notices.

    • Dual-band (selectable):

      • 410 to 475 MHz: Worldwide excluding S. Africa, Thailand, and UAE (depending on the local licensing) (P/N 218500-50).

      • 900 MHz: Fully integrated, internal 900 MHz radio; Tx/Rx 1 W transmit power (P/N 218500-50).

    • 450 MHz only (ETSI compliant for S. Africa, Thailand, and UAE):

      • 403 to 473 MHz (P/N 218500-40).

    • No UHF (P/N 218500-00).

  • Trimble IonoGuard™ technology reduces ionospheric GNSS signal disruptions. See IonoGuard settings.

  • GNSS data logging to internal memory or external USB-C flash drive. See Data Logging menu.

  • NTRIP rebroadcaster over Internal radio (450 and 900 MHz models only).

  • Radio repeater using Internal radio (450 and 900 MHz models only).

  • Trimble AutoBase™ technology. See Setting up a base station using AutoBase technology.

  • 1PPS output, event input.

  • Built-in spectrum analyzer in the web interface.

  • NMEA outputs.

  • Binary outputs.

  • 20 Hz position outputs (50 Hz with Precise Rover upgrade).

  • Precise heading capability with MBCMRx input from a Moving Base GNSS receiver.