Available upgrades

Available upgrades may differ by region. Please contact your Trimble dealer.

If these additional features are installed, they are shown on the Receiver Options web page.

Precision options and upgrades

  • RTK Rover with Base backup (P/N PR-01)

  • RTK Base (P/N PB-01)

  • Rover 10/2 Precision upgrade (P/N MAR-R750-1002)

  • Rover 10/10 Precision upgrade (P/N MAR-R750-1010)

Rover upgrades include CLAS - Centimeter-Level Augmentation Service for Japan support.

QZSS CLAS is supported. QZSS CLAS provides centimeter-level nationwide positioning PPP-RTK correction service for Japan. Compact SSR correction format broadcast at 2,000 bps on the QZSS L6D signal. QZSS CLAS supports multi-GNSS including GPS, Galileo, and QZSS. Use firmware version 6.26 or later and enable QZSS L6D on the Tracking screen.

QZSS CLAS

Static (95%)

Kinematic (95%)

Horizontal accuracy

≤ 6 cm

≤ 12 cm

Vertical accuracy

≤ 12 cm

≤ 24 cm

Signal/Constellation upgrades

All constellations and signals are included as standard.

Receivers purchased from 1 April 2024 now include BeiDou and Galileo rather than being optional upgrades. If you have purchased a receiver before 1 April 2024, Trimble recommends that you upgrade the firmware using Trimble Installation Manager to benefit from the latest improvements. See Updating a Receiver.

Special upgrades

  • Binary Outputs (GSOF, BINEX, RT17/27) (P/N CON-R750-BIN)

  • Programmatic Interface (simple HTTP scripting for integration into other web-capable platforms) (P/N CON-R750-PI)